DESIGN WIND TURBINE TRAY CABLE CONFORMABLE TO UL CRITERION 2

In general, the wire and cable used in the wind driven generator system can be divided into four classes, including:
★Wind turbine tray cable (WTTC for short)
★Thermoplastic-insulated wire and cable, such as linetype THHN and THWN; and thermoset-insulated wire and cable, such as voltage class 2000V linetype RHW-2 with additional mark used on cable tray or marked FT4 class;
★  Power-limited circuit cable, such as linetype CMG, CM, CL2, CL3 and PLTC applicable for cable tray;
★Selected optical-fiber cable, such as linetype OFN, OFC, OFNG and OFCG.Comparable to the above-mentioned cables, WTTC has more specific application in the wind power generation system so that the evaluation outline of this material will be extracted.